Cannabis flowers hanging in a drying room during drying and curing
Drying & curing

Cannabis water activity: check drying and curing on site

Drying and curing decide whether a harvest keeps its value. Water activity tells you if dried flower sits inside a safe storage range. Here is what it means, the range the industry works with, and how to check it where the material is.

Valenveras Portable LabDry Matter · Water Activity6 min read
01 — The concept

What water activity tells you

Water activity (aw) measures the free water in a material: the water available to microorganisms. It is a ratio, so it has no unit.

That is why water activity says more about storage risk than total water content alone.

Dried cannabis flower during curing, ready for a water activity check
02 — The range

The range the industry works with

ASTM D8197 sets the acceptable range for dry cannabis flower at 0.55 to 0.65 aw.

Source: ASTM D8197, Standard Specification for Maintaining Acceptable Water Activity (aw) Range (0.55 to 0.65) for Dry Cannabis Flower.

Some regulators set a limit

California
≤ 0.65 aw

Dried flower passes the lab test if it does not exceed 0.65 aw. The result appears on the certificate of analysis.

New Jersey
≤ 0.65 aw

The limit is also 0.65 aw, measured with the ASTM D8196 method.

Rules change by market, so always check the requirement where you sell.

03 — Timing

Why check during drying, not only at the end

A lab result tells you where a lot ended up. Checking on site lets you follow the lot while it is still in the drying and curing room.

Testing stops being a gate at the end and becomes a control you run continuously.

ProxiScout handheld NIR scanner by BÜCHI, part of the Valenveras Portable Lab
04 — The instrument

What the Valenveras Portable Lab reports

The Valenveras cannabis models report two drying and curing parameters:

Dry MatterWater Activity

They sit in the same panel as potency, dominant terpenes and leaf nutrients. One instrument follows the plant from the grow room to the curing room.

THCTHCaCBDCBDaCBG10 dominant terpenes8 leaf nutrients

The hardware is the ProxiScout™ handheld NIR scanner, designed and made by BÜCHI in Switzerland. The four cannabis models are built by Valenveras.

05 — The method

How to check a dried lot

Collect

Take a sample that represents the batch. Wear gloves.

Grind

Grind at least 3 grams of dried flower to the smallest particle size, then pass it through a 1 mm sieve.

Calibrate

Clean the sample cup with alcohol and calibrate with the white tile. Fill the cup and press the powder.

Scan

Press one button and follow the NeoSpectra Scan App.

Decide

See the results on your phone and in the NeoSpectra Cloud Portal, on the NeoSpectra® Platform by BÜCHI.

Grinding dried cannabis flower for NIR sample preparationPrepare
Scanning a cannabis sample with the ProxiScout NIR scannerScan
Cannabis analysis results in the NeoSpectra Scan AppDecide

Full procedure: SOP for Sample Preparation (PDF)

06 — Decide and certify

On site, you decide

The Valenveras Portable Lab is a decision tool for production. Use it to:

I

See how drying is progressing.

II

Choose when a lot moves to curing or packing.

III

Choose which lots go to the lab.

Your accredited lab certifies. It issues the certificate of analysis.

Powered by BÜCHI
FAQ

Water activity, answered

Does it replace my lab’s water activity test?

No. On-site results help you decide in production. The certificate of analysis comes from your accredited lab.

What sample do I scan?

Dried flower, ground and sieved, in the Powder Analysis Kit.

Where do I see the results?

In the NeoSpectra Scan App (iOS and Android) and the NeoSpectra Cloud Portal.

What else does the same instrument measure?

Potency, dominant terpenes, leaf nutrients, and drying and curing parameters. See the full panel.

Valenveras Portable Lab · Powered by BUCHI

See it on your own samples

Bring a dried lot and see Dry Matter and Water Activity next to potency and terpenes. For growers: the Portable Lab for cultivation.

Sources
  1. ASTM D8197, Standard Specification for Maintaining Acceptable Water Activity (aw) Range (0.55 to 0.65) for Dry Cannabis Flower.
  2. ASTM D8196, Standard Practice for Determination of Water Activity (aw) in Cannabis Flower.
  3. California Code of Regulations, tit. 4, § 15717, Moisture Content and Water Activity Testing.
  4. New Jersey Cannabis Regulatory Commission, Testing Guidance.